| 一、 | 产品概述 | |||||||||
| 创伟经过多年研究和总结工业自动化各个行业领域对运动控制的普遍需求，精心规划了步进电机产品线。 | ||||||||||
| 创伟混合式步进电机全部采用优质冷轧硅钢片和耐高温永磁体材料制作，采用业界的磁路设计方案， | ||||||||||
| 具有运行转矩大，温升小，可靠性高等特点，且内部阻尼特性良好，无明显震荡区，运行平稳。 | ||||||||||
| 一、 | Product overview | |||||||||
| After years of research and summing up the general demａnd for motion control in various fields of industrial automation, Chuang Wei has carefully planned the product line of stepping motor. Chuangwei hybrid stepper motor is made of high quality cold rolled silicon steel sheet and high temperature permanent magnet materials. It adopts the leading magnetic circuit design scheme in independent industry. It has the characteristics of large operating torque, small temperature rise, high reliability, good internal damping characteristics, no obvious vibration zone and smooth operation. | ||||||||||
| 二、 | 性能参数 | |||||||||
| 型号(Model) | 相数No.ofphase | 步距角 (Step angle)±5%° | 力矩 (Holding Troque)kg.cm | 电流 (Current)A | 轴径 (shaft diameter)mm | 引线数 (No. of line) | 重量(Weight)kg | 机身长度(Length)mm | 配套驱动器 (Driver) | |
| 42BHM29-050C-24 | 2 | 0.9 | 1.7 | 0.5 | 5 | 4 | 0.24 | 29 | CW215 | |
| 42BHM34-060-15 | 2 | 0.9 | 2.6 | 0.6 | 5 | 4 | 0.28 | 34 | CW215 | |
| 42BHM39-100-22D | 2 | 0.9 | 3.4 | 1 | 5 | 4 | 0.45 | 39 | CW215 | |
| 42BHM48-168A-24 | 2 | 0.9 | 4.4 | 1.68 | 5 | 4 | 0.6 | 48 | CW422C | |
| 42BHP37W-060-24 | 3 | 1.2 | 2.6 | 0.6 | 5 | 3 | 0.3 | 37 | CW215 | |
| 42BHP50-150A-24 | 3 | 1.2 | 3.2 | 1.5 | 5 | 3 | 0.75 | 50 | CW422C | |
| 42BHH25-040A-24 | 2 | 1.8 | 1.7 | 0.4 | 5 | 4 | 0.22 | 25 | CW215 | |
| 42BHH29-120A-20 | 2 | 1.8 | 2.1 | 1.2 | 5 | 4 | 0.24 | 29 | CW215 | |
| 42BHH34-160A-24E | 2 | 1.8 | 2.9 | 1.6 | 5 | 4 | 0.25 | 34 | CW422C | |
| 42BHH39-168A-24 | 2 | 1.8 | 4.2 | 0.8 | 5 | 4 | 0.4 | 39 | CW215 | |
| 42BHH48-08A-24 | 2 | 1.8 | 3.2 | 0.8 | 5 | 6 | 0.6 | 48 | CW215 | |
| 42BHH52-150B-20B | 2 | 1.8 | 6.8 | 1.5 | 5 | 4 | 0.8 | 52 | CW422C | |
| 42BHH58-030A-21A | 2 | 1.8 | 6 | 0.3 | 5 | 4 | 0.9 | 58 | CW215 | |
| 电流(Current)A：0.3-1.68 | ||||||||||
| 力矩(Holding Troque)kg.cm：1.7-6.8 | ||||||||||
| 机身长度(Body Length)mm:29-58 | ||||||||||
| 仟渔 | / |
所有评论仅代表网友意见，与本站立场无关。