本公司5月10号08点55分报道：TCJT-33型热变形温度维卡软化点测定仪价格@市场报道
产品简介
YI、TCJT-33型热变形温度维卡软化点测定仪概述：
YI、TCJT-33型热变形温度维卡软化点测定仪概述：
TCJT-33型热变形温度维卡软化点测定仪是依据新的标准而设计制造的非金属材料试验仪器，主要用于塑料、硬橡胶、尼龙、电绝缘材料、长纤维增强复合材料、高强度热固性层压材料等非金属材料的热变形温度及维卡软化点温度的测定。操作方便、控制，是种智能化高的测试仪器，广泛应用于大院校，科研单位及产品质量监督检验单位。PID调相输出，具有上限温度设定，试验温度达到上限温度时自动停止加热。
执行标准：符合JTGE50、GB/T 1633、GB/T 8802、GB/T 1634、ISO 2507、ISO 75、ISO 306、ASTM D 1525, ASTM D 648等标准要求。
Overview of tcjt-33 hot deformation temperature Vicat softening point tester:
Tcjt-33 thermal deformation temperature Vicat softening point tester is a non-metallic material test instrument designed and manufactured according to the new standard. It is mainly used to measure the thermal deformation temperature and Vicat softening point temperature of plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composites, high strength thermosetting laminated materials and other non-metallic materials. Easy to operate, accurate control, is a highly intelligent test instrument, widely used in Colleges and universities, scientific research institutions and product quality supervision and inspection units. PID phase modulation output, with upper limit temperature setting, when the test temperature reaches the upper limit temperature, the heating will s automatically.
Executive Standards: meet the requirements of jtge50, GB / T 1633, GB / T 8802, GB / T 1634, ISO 2507, ISO 75, ISO 306, ASTM D 1525, ASTM D 648 and other standards.
技术参数
二、TCJT-33型热变形温度维卡软化点测定仪技术参数：
二、TCJT-33型热变形温度维卡软化点测定仪技术参数：
1、温度控制范围：室温～300℃
2、升温速率：120℃/h 、 50℃/h
3、大温度误差：±0.5℃
4、温度测量点：1个
5、试样架数：3
6、形变测量量具：数显千分表
7、形变测量范围：0～1.1mm
8、试样支承跨距：64mm、100mm
9、大形变测量误差：0.01mm
10、加热介质：甲基硅油（客户自备）
11、冷却方法：150℃以上自然冷却，150℃以下水冷或自然冷却
12、所需空间：后0.5m，左右1.5m
13、电源：220V
14、外型尺寸：850×450×670mm
15、整机重量：67Kg
Technical parameters of tcjt-33 hot deformation temperature Vicat softening point tester:
1. Temperature control range: room temperature ~ 300 ℃
2. Heating rate: 120 ℃ / h, 50 ℃ / h
3. Maximum temperature error: ± 0.5℃
4. Temperature measuring point: 1
5. Number of test pieces: 3
6. Deformation measuring tool: digital dial indicator
7. Deformation measurement range: 0-1.1 mm
8. Support span of sample: 64mm, 100mm
9. Maximum deformation measurement error: 0.01mm
10. Heating medium: methyl silicone oil (customer provided)
11. Cooling method: natural cooling above 150 ℃, water cooling or natural cooling below 150 ℃
12. Required space: 0.5m in front and back, 1.5m in left and right
13. Power supply: 220 V
14. Dimensions: 850 × four hundred and fifty × 670mm
15. Weight: 67kg
产品选型
主营产品：土工检测仪器,防水材料检测仪器,陶瓷砖检测仪器,水利水电粗粒土系列,沥青仪器检测仪器
主营产品：土工检测仪器,防水材料检测仪器,陶瓷砖检测仪器,水利水电粗粒土系列,沥青仪器检测仪器
Main products: geotechnical testing instrument, waterproof material testing instrument, ceramic brick testing instrument, water conservancy and hydropower coarse-grained soil series, asphalt testing instrument
所有评论仅代表网友意见，与本站立场无关。