- ARM Cortex-M4F CPU running at up to 120 MHz
- Floating Point Unit (FPU)
- Embedded Trace Module (ETM) with instruction trace stream
- Core Sight Embedded Trace Buffer (ETB)
- Error Correction Code (ECC)
- Dual bank with Read-While-Write (RWW) support
- EEPROM hardware emulation
- Error Correction Code (ECC) RAM option
- Up to 4 KB of Tightly Coupled Memory (TCM)
- Up to 8 KB additional SRAM with backup retention capability
- Power-on Reset (POR) and Brown-out detection (BOD)
- Internal and external clock options
- External Interrupt Controller (EIC)
- Two-pin Serial Wire Debug (SWD) programming, test, and debugging interface
- Five Low Power Modes (Idle, Standby, Hibernate, Backup, and Off )
- Sleep Walking peripherals.
- Battery backup support
- Embedded Buck/LDO regulator supporting on-the-fly selection.
- 65µA/MHz active power consumption.
- Five confidential modes of operation (ECB, CBC, CFB, OFB, CTR)
- True Random Number Generator (TRNG)
- RSA, DSA
- Elliptic Curves Cryptography (ECC) ECC GF(2n), ECC GF(p)
- Integrity Check Module (ICM) based on Secure Hash Algorithm (SHA1, SHA224, SHA256), DMA
- 32-channel Direct Memory Access Controller (DMAC)
- Compatibility with SD and SDHC Memory Card Specification Version 3.01
- Compatibility with SDIO Specification Version 3.0
- Compliant with JDEC specification, MMC memory cards V4.51
- eXecute-In-Place (XIP) support
- Up to 75 MHz SDR operation and DDR support
- Embedded host and device function
- 10/100 Mbps in MII and RMII with dedicated DMA
- IEEE 1588 Precision Time Protocol (PTP) , Time Stamping Unit (TSU) support
- IEEE802.3AZ/AF/PoE energy efficiency support
- Support for 802.1AS and 1588 precision clock synchronization protocol
- Wake on LAN support
- supporting CAN2.0 A/B and CAN-FD 1.0
- USART with full-duplex and single-wire half-duplex configuration
- ISO7816
- I2C up to 3.4MHz
- SPI
- LIN master/slave
- RS485
- SPI inter-byte space
- One two-channel Inter-IC Sound Interface (I2S)
- Up to 14-bit parallel capture mode
- Up to 256 channel capacitive touch and proximity sensing
- 32-channel Event System
- 16-bit ,32-bit or 8-bit TC with two compare/capture channels
- Two 24-bit Timer/Counters for Control (TCC), with extended functions
- Three 16-bit Timer/Counters for Control (TCC), with extended functions
- Up to 5 wake-up pins with tamper detection and de-bouncing filter
- Watchdog Timer (WDT) with Window mode
- CRC-32 generator
- Position Decoder (PDEC)
- Frequency meter (FREQM)
- One Configurable Custom Logic (CCL)
- Differential and single-ended input
- Automatic offset and gain error compensation
- Oversampling and decimation in hardware to support 13-, 14-, 15-, or 16-bit resolution
- Dual 12-bit, 1 MSPS Output Digital-to-Analog Converter (DAC)
- Two Analog Comparators (AC) with Window Compare function
- One temperature sensor
- 99 programmable I/O pins
- 1.71V – 3.6V
- 128-pin TQFP,120-pin TFBGA
所有评论仅代表网友意见，与本站立场无关。