产品规格
S1规 Go for S1 dimension gauge (IEC 7006-27C-1)
图中所示量规塞处于检验状态。当柱塞处于静止状态时，W面应比X面缩进更深些。
| Reference 尺寸符号 | Dimension/尺寸（mm） | Tolerance/公差（mm） |
| d | 26.45 | +0.03/-0.0 |
| H | 14 | ±0.1 |
| M | 13 | ±0.1 |
| O | 23.0 | ±0.03 |
| S | 8.5 | +0.01/-0.0 |
| V | 1.5 | +0.02/-0.0 |
Purpose目的：
To check the dimensions S1 minimum and S1 maximum of E27 caps on finished lamps.
检验成品灯上E27灯头尺寸S1的大值和小值。
Testing 测试方法：
When the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surface “W” shall be co-planar with or project beyond surface “X” but it shall not project beyond surface “Y”.
当成品灯的灯头插入量规时，塞柱的W面应与X面共面或凸出X面，但不得凸出Y面。产品相册
所有评论仅代表网友意见，与本站立场无关。