型号：JHD-AD065C-120500
输入电压：100~240V 50/60Hz 1.5A
输出电压：12V
输出电流：5A
证书：FCC UL GS CCC CE CB
颜色：黑色或白色
保护机制：OVP OCP SCP
效率：DOE V
保修期：2 年
Output Characteristics | Output Voltage (DC) | 3V-5V | 5.5V-12V | 12.5V-15V | 15.5V-24V | 24.5V-48V | |
| Output current(A) | 6.5A-6A | 5.5A-5A | 4.8A-4.0A | 3.8A-2.7A | 2.6A-1.3A | ||
| Output power(W) | 30W | 60W | 65W | 65W | 65W | ||
| ripple and noise(MVP-P) | 2% | 2% | 2% | 2% | 2% | ||
| Output voltage precision | ±5% | ±5% | ±5% | ±5% | ±5% | ||
| Line regulation | ±2% | ±2% | ±2% | ±2% | ±2% | ||
| Load regulation | ±3% | ±3% | ±3% | ±3% | ±3% | ||
| rise up time | ≤500ms | ≤500ms | ≤500ms | ≤500ms | ≤500ms | ||
| Typ[hold up time] | 10mS min | 10mS min | 10mS min | 10mS min | 10mS min | ||
Input Characteristics | No Load Power | ≤0.075W@230Vac | |||||
| efficiency() | ≥75% | ≥75% | ≥78.88% | ≥78.88% | ≥78.8% | ||
| Input voltage range | 100-240VAC(85-265VAC);85-300V[customize] | ||||||
| Input frequency | 47~63HZ | ||||||
| Inputcurrent | 0.25A Max | ||||||
| Inrush current | full load≤30@230VAC | ||||||
| Leakage current | 100-240VAC,Lealage current≤0.10mA | ||||||
| surge | ±1KV D.M;±2KV C.M 4000~4200v[customize] | ||||||
protection | OCP | OCP point130%-150% of rated output current,output shall hiccup when the over current applled,ａnd shall be self-recovery when the fault is removed] | |||||
| OTP | When the power supply after using the environment more than limit temperature,power supply will automatically entet protection state,when the temperature retumed to normal,the power supply to retum tu work. | ||||||
| SCP | Hiccup whem output shorted,ａnd the power supply shall be selp-recover when fault is removed | ||||||
Environment | Storage temperature&Humidlty | storage temperature-20℃~85℃,storage humidity 5%~95% | |||||
| Operate temperature&Humidlty | operate temperature-20℃~+40℃,(-40℃~+75℃)Customoperate temperature-20℃~+40℃,(-40℃~+75℃)Custom | ||||||
| Vibrate test | 10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth:3.5mm)for 1Hour for each of the perpendicular axes X,Y,Z | ||||||
Safety and EMC | Dielectric Strength(Hi-pot) | Primary to Secondary 3.5KV/5mA 60S No Breakdown No Arc | |||||
| Insulation Resistance | 100MΩ min.@ primary to secondary add a 500Vdc test voltage | ||||||
| InputCharacteristics | IEC | ||||||
| Others | MTBF(H) | Normal30000H Customize 50000H | |||||
| color | black and white | ||||||
所有评论仅代表网友意见，与本站立场无关。