Cement soil permeability tester

1、 Product introduction:

It is mainly used in the test of impermeability of cement soil and the determination of impermeability grade. At the same time, it can also be used for the measurement of air permeability and quality inspection of building materials. Therefore, it has been widely used by relevant production, construction, design, teaching and research departments.

The function of the cement soil permeability coefficient tester is the same as that of the ordinary type. Its main feature is that the pressure value is displayed on the pressure display instrument through the sensor, and it can automatically boost the pressure and complete the test according to the set procedure, so as to reduce the burden of workers.

2、 Main technical parameters

1. Z large working pressure: 2.5MPa (users can choose freely under 2.5MPa)

2. Working mode: automatic constant voltage (digital display type: automatic constant voltage and automatic boost)

3. Number of test pieces available at one time: 3

4. Geometric dimension of trial mold (also known as main mold)

Diameter of upper opening of test piece cavity: φ 70mm

Diameter of lower opening of mold cavity: φ 80mm

Height: 40mm

5. Parameters of plunger pump: flow: 0.16l/min

6. Motor

Power: 120W

Power supply: 380V-50Hz

7. Overall dimension: 950 × five hundred × 800mm

8. Mass: ≈ 100kg

水泥土渗透系数试验仪

一、产品简介：

主要使用于水泥土抗渗性能的试验和抗渗标号的测定。同时也可利用它做建筑材料透气性的测定和质量检查。因此得到了有关生产、施工、设计、教研等部门的广泛使用。

水泥土渗透系数试验仪功能与普通型相同，其主要特点是压力值通过传感器在压力显示仪上显示出来，并能按设定的程序实现自动升压、自动完成试验，减轻工作人员负担。

二、主要技术参数

1、Z大工作压力： 2.5Mpa（用户可在2.5Mpa下自由选择）

2、工作方式：自动恒压（数显型：自动恒压且自动升压）

3、一次可作试件数： 3个

4、试模几何尺寸（亦称主模）

试件模腔上口直径：φ70mm

模腔下口直径：φ80mm

高度： 40mm

5、柱塞泵参数：流量： 0.16L/min

6、电动机

功率：120W

电源：380V-50HZ

7、外形尺寸： 950×500×800mm

8、质量：≈100KG