下述文献采用Sensorex 溶解氧传感器（Campbell CS511溶解氧传感器）：
1.Evaluation of Continuous In Situ Monitoring of Soil Changes with Varying Flooding Regimes
Communications in Soil Science and Plant Analysis
Volume 39, Issue 11-12, 2008
（Dissolved oxygen was measured at the soil/water interface using submersible galvanic dissolved
oxygen (model CS511) sensors manufactured by Sensorex (Garden Grove, Calif.) and distributed
by Campbell Scientific (Logan, Utah).
2. Wireless sensor network application for cost effective environmental monitoring
IEEE Southeastcon 2009
The MDA300 data acquisition board developed at UCLA's Center for Embedded Network Sensing
(CENS) includes an onboard ... Most water ranges from 6.5 to 8.5. A sensor called the Dissolve
Oxygen CS 511-L Probe [6] by Campbell Scientific
3.
Scope for growth of Mytilus galloprovincialis and Perna viridisas a thermal stress index in the coastal waters of Japan: Field studies at the Uranouchi inlet and Yokohama
The underwater respirometer (URM) was equipped with programmable water exchange pump(0.2 l s − 1 ), stirring fan, logging type dissolved oxygen sensor (galvanic type, OxyGuardCS511-L),
4.
The influence of media type on removal of arsenic, iron and boron from acidic wastewater in horizontal flow wetlａnd microcosms planted with Phragmites australis
The probes used were Sensorex CS511-L, CS525 ISFET, 109SS (Campbell Scientific, Australia),
5.
Use of Autonomous Vehicles for Drinking Water Monitoring and Management in an Urban Environment
An infrared optical sensor was developed successfully for monitoring water quality with ...
Figure 3.Signal flow diagram explaining the working of the system. Three DO sensors
(manufactured by Campbell Scientific Inc, Model no. CS511-l
