1、 GENERAL INFORMATION
Item | Contents | Unit |
LCD Display Size | 5.0" | inch |
Module Structure | LCD Display + CTP Touch + PCBA | --- |
LCD Display Type | TFT/TRANSMISSIVE | --- |
LCD Display Mode | Normally Black | --- |
Viewing direction | ALL VIEW | O' Clock |
PCBA Outside Dimensions | 85.00(W)*55.00(H)*8.50(T) | mm |
LCM Outside Dimensions | 132.72(W)*87.80(H)*14.00(T) | mm |
Active area (WxH) | 108.60(W)*65.16(H) | mm |
Number of Dots | 800x480 | --- |
Driver IC | NT68661 | --- |
Colors | 16.7M | --- |
Backlight Type | 6*3 LEDS / White | --- |
Module Interface Type | HDMI Interface（TFT） | --- |
USB Interface（CTP） | --- | |
System Support | Raspberrv Pi /Win7 /Win8 /Win10 | --- |
Android/Linux(need to be configured first) | --- | |
Input Voltage(VDD) | DC-5.0V | V |
1、 ABSOLUTE MAXIMUM RATINGS
Parameter | Symbol | Min | Max | Unit |
Power for Circuit Driving | VCC | -0.3 | 5.5 | V |
Power for Circuit Logic | IOVCC | -0.3 | 3.3 | V |
Input voltage | Vin | -0.3 | VCC + 0.3 | V |
Operating temperature | Top | -20 | 70 | ℃ |
Storage temperature | Tst | -30 | 80 | ℃ |
Humidity | RH | / | 90%(Max60℃) | RH |
Note: Absolute maximum ratings means the product can withstａnd short-term, not more than 120 hours. If the product is a long time to withstａnd these conditions, the life time would be shorter.
2、 ELECTRICAL CHARACTERISTICS
Parameter | Symbol | Min | Typ | Max | Unit |
PCBA Operating Voltage | VDD | --- | 5.0 | --- | V |
TFT Power for analog/logic | Vcc -GND | 2.65 | 3.3 | 3.6 | V |
TFT I/O power supply | IOVCC | 1.65 | 3.3 | 3.6 | V |
Input Current | Idd | TBD | TBD | TBD | V |
Input voltage ' H ' level | Vih | 0.7IOVCC | -- | IOVCC | --- |
Input voltage ' L ' level | Vil | GND | 0 | 0.3IOVCC | --- |
Output voltage ' H ' level | Voh | 0.8IOVCC | -- | IOVCC | --- |
Output voltage ' L ' level | Vol | GND | 0 | 0.2IOVCC | --- |
3、 CTP CHARACTERISTICS
Item | Contents | Unit |
Panel Type | Glass Cover + Glass Sensor | --- |
Resolution | 800 X 480 | Pixel |
Surface Hardness | 6H | --- |
Transparency | ≥86% | mm |
Driver IC | FT5316 | --- |
Interface Type | USB Interface | --- |
Support Points | 5 | --- |
Sampling Rate | 20~100 | Hz |
Supply voltage | 3.3V | V |
6. Back Light CHARACTERISTICS
Usingcondition:constantcurrentdrivingmethodIf=20mA(+/-10%)
Item | Symbol | Min | Typ | Max | Unit | Condition | |
Forward voltage | Vf | 17.8 | 18.3 | 18.6 | V | If=40mA | |
Luminance with LCD | Lv | -- | 450 | -- | cd/m2 | If=40mA | |
Number of LED | -- | 6*2 | Pcs | -- | |||
Connection mode | S | 6 serial 2 | -- | -- | |||
Note. Measuring method for Contrast ratio, surface luminanc
B、HDMI Interface Description
Pin.No | Symbol | DESCRIPTION |
1 | RX-D2+ | Positive side of channel 2 TMDS low-voltage signal |
2 | GND | Ground |
3 | RX-D2- | Negative side of channel 2 TMDS low-voltage signal |
4 | RX-D1+ | Positive side of channel 1 TMDS low-voltage signal |
5 | GND | Ground |
6 | RX-D1- | Negative side of channel 1 TMDS low-voltage signal |
7 | RX-D0+ | Positive side of channel 0 TMDS low-voltage signal |
8 | GND | Ground |
9 | RX-D0- | Negative side of channel 0 TMDS low-voltage signal |
10 | RX-DCLK+ | Positive side of reference clock. TMDS low-voltage signal |
11 | GND | Ground |
12 | RX-DCLK- | Negative side of reference clock. TMDS low-voltage signal |
13 | CEC | No Connection |
14 | NC | No Connection |
15 | SCL | DDC SCL |
16 | SDA | DDC SDA |
17 | GND | Ground |
18 | +5.0V | +5V Power |
19 | HOT-DET | Hot Plug Detect |
C、USB Touch Interface Description
Pin.No | Symbol | DESCRIPTION | |
1 | GND | Ground | |
2 | USB-D+ | USB Data+ | |
3 | USB-D- | USB Data- | |
4 | +5.0V | USB Power |
D、DC Power Interface Description
Pin.No | Symbol | DESCRIPTION | |
1 | +5.0V | DC Power | |
2 | +5.0V | DC Power | |
3 | GND | Ground | |
4 | GND | Ground |
A、 APPLICATION CASE
Driven by Raspberry Pi (linux) & win7/win8/win10 systems
| 仟渔 | / |
所有评论仅代表网友意见，与本站立场无关。