Using advanced ultraviolet (UV) absorption technology, Hach's new NITRATAX sc UV Nitrate Analyzer offers unprecedented simplicity, accuracy and economy in nitrate analysis. By continuously measuring the UV light absorbed by nitrates, the instrument eliminates the need for reagents, sample conditioning and frequent calibrations. With few moving parts, the NITRATAX Analyzer is simple to operate and maintain. NITRATAX is the ideal choice for virtually any application where nitrate levels must be monitored to ensure consistent water quality of drinking water, wastewater, agricultural runoff, lakes and rivers. Note: Must be connected to a sc200 Universal Controller to form a complete system.
- UV Analysis Eliminates Reagents, Sampling, and Sample Conditioning
- UV Absorption Method - Proven, Continuous, Precise
- Choice of Three Models
- Self-Cleaning Sensor
- Optional Bypass Panel
UV Analysis Eliminates Reagents, Sampling, and Sample Conditioning
Using advanced ultraviolet (UV) absorption technology, Hach NITRATAX sc UV Nitrate Sensors offer unprecedented simplicity, accuracy, and economy in nitrate analysis. By continuously measuring the UV light absorbed by nitrates, NITRATAX sc sensors eliminate the need for reagents, sample conditioning, and frequent calibrations.
UV Absorption Method - Proven, Continuous, Precise
NITRATAX sc sensors rely on the principle that molecular bonds absorb ultraviolet (UV) light. In this case, nitrate (NO3) and nitrite (NO2) absorb UV light. As the concentration of nitrate or nitrite increases, UV absorption also increases. A built-in photometer measures the primary beam, while a second beam of UV light provides a reference standard and corrects for interference caused by turbidity and organic matter. Results are reported on the controller unit's alphanumeric display in mg/L of nitrate (NO3) or nitratenitrogen (NO3-N).
Choice of Three Models
NITRATAX plus sc Process sensor for continuous measurement in drinking water, wastewater, or activated sludge. Turbidity compensation using reference measurement. NITRATAX eco sc low cost sensor for measurement, especially for sewage treatment plants with intermittent aeration technology. Turbidity compensation using reference measurement. NITRATAX clear sc Process sensor for continuous measurement in clean water such as drinking water or wastewater effluent.
Self-Cleaning Sensor
With the sensor submerged in the sample stream, the detector windows are automatically cleaned by a built-in wiper that eliminate surface films or particles that can diminish accuracy.
Optional Bypass Panel
An optional Bypass Panel or flow-through sample cell is available for clean water applications when direct immersion inOptional Bypass Panel a sample stream is impractical. The Bypass Panel uses the same probes as the immersion sensors for greater flexibility.
What's in the box
Nitrate probe, standard solution, user manual
Specifications
Accuracy:± 3 % of measured value +0.5 mg/l (with standard solutions)
Cable Length:10 m fixed cable at sensor
Dimensions (D x L):2.76 in x 13.11 in (70 mm x 333 mm)
Length:13.1 in ( 333 mm )
Measuring Interval:≥ 1 to 30 min (fixed values selectable)
Measuring Principle:UV absorption measurement (patented 2-beam technique)
Operating Temperature Range:2 to 40 °C
Path Length:1 mm
Pressure Limit:≤ 0.5 bar
Range:0.1 to 100 mg/L NO2+3–N
Resolution:0.1 mg/L
Response Time:≥ 1 min
Weight:7.94 lbs. (3.6 kg)
所有评论仅代表网友意见,与本站立场无关。