斜板沉淀器，根据进出水的水流方向，主要分为三类：同向流(下向流)斜板沉淀池、异向流(上向流)斜板沉淀池、侧向流斜板沉淀池。使用泛的是异向流(上向流)斜板沉淀器，水流从斜管沉淀池的斜板填料下部进水，水中的颗粒沉淀在斜板上，并顺着倾斜的斜板向下滑入泥斗，分离后的清水自设备上部的集水装置排出斜板沉淀器。Inclined plate settlers, according to the direction of water flow in and out of the water, are mainly divided into three categories: co-flow (downward flow) sloping plate sedimentation tank, non-directional flow (upward flow) sloping plate sedimentation tank, lateral flow sloping plate sedimentationPool.The most widely used is the counter-flow (upward flow) inclined plate settler. Water flows from the lower part of the inclined plate filler of the inclined tube sedimentation tank. The particles in the water settle on the inclined plate and slide down along the inclined plate.Into the mud bucket, the separated clean water is discharged from the inclined plate settler from the water collecting device on the upper part of the equipment.

多功能高效组合斜板填料由乙丙共聚斜板片和斜板支撑杆两部分组合而成，材质均为乙丙共聚，通过斜板支撑杆的前后串连将斜板片组合成水处理工艺中常用的斜板设备。多功能高效组合斜板填料具有安装拆解方便，斜板间距可调，连接长度不限、整体强度高、耐腐蚀等优点。The multifunctional and efficient combined inclined plate packing is composed of two parts of the ethylene-propylene copolymer inclined plate and the inclined plate support rod. The materials are all ethylene-propylene copolymer. The inclined plate is combined into a water treatment process through the front and rear serial connection of the inclined plate support rod. Inclined plate equipment commonly used in China. The multifunctional and efficient combined inclined plate packing has the advantages of convenient installation and disassembly, adjustable inclined plate spacing, unlimited connection length, high overall strength, and corrosion resistance.

斜板支撑杆可设计多种规格尺寸，根据不同的斜板参数要求进行配套，可实现不同的斜板间距、角度等要求。多功能高效组合斜板填料内部水流流道通畅，不易积泥夹泥，上向流沉淀池和侧向流沉淀池均可应用，因此适用于各种水处理工艺，其强度高、耐腐蚀、可拆解的特性使其与传统斜板相比使用寿命延长。Inclined plate support rods can be designed in a variety of specifications and sizes, and matched according to different inclined plate parameter requirements, which can achieve different inclined plate spacing and angle requirements. The internal water flow channel of the multifunctional and efficient combined inclined plate packing is unobstructed, and it is not easy to accumulate mud and mud. Both upflow sedimentation tank and lateral flow sedimentation tank can be applied. Therefore, it is suitable for various water treatment processes with high strength, corrosion resistance, and The detachable feature makes it have a longer service life compared with traditional inclined plates.多功能高效组合斜板填料组装前先在斜板片上开若干小孔，后将斜板支撑杆连接头穿过小孔与另一个支撑杆的连接楔尾用力楔合，使两个支撑杆与斜板片紧固成一个整体，重复这一步骤即可将多个斜板片串联成一个整体，整个安装过程不需任何机械加工设备、安装极其简便。Before assembling the multifunctional high-efficiency combination inclined plate packing, open a number of small holes in the inclined plate, and then insert the connecting head of the inclined plate support rod through the small hole and strongly wedge the connecting wedge tail of the other support rod to make the two support rods and The inclined plates are fastened into a whole, and multiple inclined plates can be connected in series to form a whole by repeating this step. The whole installation process does not require any mechanical processing equipment, and the installation is extremely simple.

斜板填料焊接安装工艺的好坏直接决定了它的使用周期。下面给大家简述下斜板填料的焊接方法。

1.斜板填料焊接前，需要找到合适的工作平台。然后首先确定平板之间的工字肋条的数量。假如工字肋条为7条，就要在平板上面平均布置。一般平板长宽均为1000mm，那么7条肋条的间距应该为1000/8=125mm。确定好规定的间距距离后就可以进行工字肋条焊接事宜。Before welding the inclined plate filler, it is necessary to find a suitable working platform. Then first determine the number of I-ribs between the plates. If there are 7 I-shaped ribs, they must be evenly arranged on the plate. Generally, the length and width of the plate are 1000mm, so the spacing of the 7 ribs should be 1000/8=125mm. After determining the specified spacing distance, I-rib welding can be carried out.

2.焊接电烙铁的使用。焊接斜板填料应使用标准3尖头烙铁头，待电烙铁加热到工作温度后。以工字肋条和平板垂直接触的位置，沿45度角度进行插入焊接，需要注意的是烙铁头必须扎透工字条下部与平板连接处，这样可以保证两者牢固的粘接在一起，单条肋条焊接点不少于12处且均匀分布。The use of soldering iron. Welding inclined plate filler should use a standard 3-point soldering iron tip, after the electric soldering iron is heated to the working temperature. Insert the welding at the position where the I-shaped rib and the plate are in vertical contact with a 45-degree angle. It should be noted that the soldering iron tip must penetrate the lower part of the I-shaped bar and the connection of the plate to ensure that the two are firmly bonded together. A single rib There are no less than 12 welding points and evenly distributed.

3.焊接成型的单组斜板填料，要有序摆放于空地。然后依次放入池中，单组斜板进行最后的整体连接焊接，并做稳定加固处理。阴阳角的处理方法与蜂窝斜管填料一致。整体安装需要注意时刻调整间距和平整度，保证做出来的整齐牢固。The welded single set of inclined plate fillers should be placed in an orderly manner in the open space. Then they are put into the pool one by one, and the single group of inclined plates are welded for the final integral connection and stabilized and reinforced. The treatment method of the yin and yang angle is the same as that of the honeycomb inclined tube packing. The overall installation needs to pay attention to adjusting the spacing and flatness at all times to ensure that it is neat and firm.